Tamper Resistant Hardware For Cameras

Rodney Thayer

Axis uses simple Torx screws. There are dozens of options to buy those. Bosch uses TT25 - that bit alone costs 8 dollars online. So TT25's are more tamper resistant than the average shoplifting teenager is likely to find at Home Depot. Do people use tamper resistance hardware? Do people deploy the (hardware or software) tamper features in cameras?

Show oldest first Show newest first

John Lord

03/22/13 07:08pm

the torx pin head screws axis uses on the 212/216/3301-4 line what size are they . We recently did some remodeling here and i took down alot of cameras and lost all the dome screws

Top Comment Votes - Past 3 Months

1. John Honovich - 1655
2. Chris Dearing - 924
3. Brian Karas - 329
4. Michael Miller - 263
5. Ethan Ace - 202
6. Brian Rhodes - 198
7. Greg Cortina - 190
8. Sean Patton - 176
9. Frank Lucero - 163
10. Stephen Green - 153
11. Marty Major - 150
12. Sean Nelson - 125
13. Rick Caruthers - 105
14. Daniel Tyrrell - 83
15. Andrew Myers - 76
16. Jay Hobdy - 66
17. Jon Dillabaugh - 66
18. Ari Erenthal - 64
19. Clint Hays - 64
20. Rich Moore - 61

Manufacturers

Newest Discussions

Discussion	Posts	Latest
Pixels Per Foot????? (1) Started by Undisclosed #1	1	25 minutes by Undisclosed #1
Head End NVR Replacement - Avigilon? Genetec? Other? (5) Started by Rick Thornton	5	less than a minute by Undisclosed #2
Can Anyone Recommend A Good Inexpensive 8 Channel Dante Compatible Amplifier? (7) Started by David Matyas	7	1 minute by David Matyas
Anyone Know A Way To Integrate Environmental Sensors Into A VMS? (8) Started by Matt Bartenhagen	8	about 17 hours by Jonathan Strauss
Virtual Lunch And Learn - Good Or Bad Idea? (7) Started by John Honovich	7	about 2 hours by Jay Hobdy