Subscriber Discussion

Outdoor PIR For CCTV Activation?

Dennis Ruban

•Feb 05, 2019

I couldn't find any posts/articles here regarding the outdoor PIRs, so I'm starting this discussion.

What do you use to trip the cameras? I don't want to rely on a pixel color change or CCTV analytics, as it's still not that reliable as PIR technology. I use the Optex SIP series, which is great but very expensive, so I'm looking for a cheaper alternative. For short distances (up to 15m/50ft) I can go with Bosch OD850 or Optex HX series. But what to use for 50-150ft? I just googled and found Interlogix DL600 which is around $100. The price looks very attractive, but I was not able to find any reviews or field tests: https://static.interlogix.com/library/74941_wired_outdoor_dual_tech_pir_detector_ds.pdf

Could anyone suggest a reliable outdoor solution?

Reactions:

(2)

Undisclosed Integrator #1

•Feb 06, 2019

http://www.gjd.co.uk/

Reactions:

(3)

Undisclosed Integrator #2

•Feb 06, 2019

Gjd (www.gjd.co.uk) and the interlogix one are both decent. Be mindful though to check the rear cable grommets as they are rubbish. I suggest sealing with silicone / acrylic. I’ve seen a few interlogix detectors turn into an aquarium

Reactions:

(4)

Dennis Ruban

•Feb 06, 2019

In reply to Undisclosed Integrator #2

it doesn't look like they sell Gjd in Canada. I'll try interlogix, thank you!

Reactions:

Undisclosed #3

•Feb 06, 2019

https://www.protechusa.com/products/piramid-xl-mil/

If you use these make sure you buy the audible piezo for walk testing and set up.

Good Luck!

Reactions:

Dennis Ruban

•Feb 06, 2019

In reply to Undisclosed #3

it's $1k for 100x10 ft coverage. Optex is way cheaper and I'm looking for a solution to replace the expensive optex :)

Reactions:

John Bazyk

•Feb 06, 2019

Command Corporation • IPVMU Certified

Check out Optex. They work really well, a few of the models you can put wireless transmitters in and go wireless straight to the camera where you have inputs and a receiver. Just need to get power there for the receiver.

Reactions:

Dennis Ruban

•Feb 06, 2019

In reply to John Bazyk

that was the point of my post, to find a cheaper alternative to Optex :)

I know they make really good sensors, I have installed several and I'm happy with Optex. Just expensive for my typical budget.

Reactions:

John Bazyk

•Feb 06, 2019

Command Corporation • IPVMU Certified

In reply to Dennis Ruban

Have you looked at the FitLink ones? I can't remember the price but they're a new line and they're lower cost than the older ones.

Reactions:

Dennis Ruban

•Feb 06, 2019

In reply to John Bazyk

it looks like an old name, they don't have this one on the website anymore. Optex has a gap between affordable LX/HX series for the distances up to 50ft and expensive SIP for 100+ ft. There's nothing in a mid-price range for 50-150 ft coverage.

I'll buy that Interlogix one and test it. $100 for 100*80ft sounds like a steal.

Reactions:

Paul Tibbenham

•Mar 07, 2019

Hi Dennis,

I work for GJD, our US base is in California. www.gjdusa.com

We sell through Accu-Tech distributor.

Please let me know if you would like to have a chat about the products.

Thanks.

Reactions:

Dennis Ruban

•Mar 07, 2019