Help Adding ONVIF Cameras Into Genetec?
How can I add ONVIF cameras into Genetec? I don't have any experience with Genetec and don't know if it can support Avigilon or if I should add it as an ONVIF camera? I didn't find trial version of Genetec online.
I have Omnicast 4.7 and have the "Cam Editor" program installed. I'm having trouble making sense of the .cam, .cam2, .xml files. Not sure where to put the stream url so that "Config Tool" will recognize my stream. I can use "ONVIF" from the selection drop down box and Config will recognize audio and input contact, and model name, but no video stream. I've tried several of the other mfg's listed with same results. I was trying to connect a LG LND 5100 brand cam. Genetec offers no help on their gtap site and since I'm and end user I'm shut out of same with insufficent privledges. Any sugesstions are truly appreciated.
Newest Discussions
| Discussion | Posts | Latest |
|---|---|---|
|
Started by
Fletcher Williams
|
30
|
34 minutes by Undisclosed #2 |
|
Started by
Luke Barnhart
|
6
|
less than a minute by Undisclosed Manufacturer #3 |
|
Started by
John Honovich
|
18
|
about 1 hour by Brian Rhodes |
|
Started by
Undisclosed #1
|
9
|
less than a minute by Undisclosed Integrator #3 |
|
Started by
Undisclosed End User #1
|
8
|
less than a minute by Undisclosed Manufacturer #2 |