Does anyone know of a wireless motion detector transmitter and receiver that would connect to the external alarm input on a DVR. Battery powered on the transmitter side would be a big help also.
Subscriber Discussion
Does Anyone Know Of A Battery Powered Wireless Motion Detector Transmitter/Receiver That Will Connect To DVR External Alarm Input?
UI
Undisclosed Integrator #1
Jun 04, 2018Check out Innovonics.
https://www.inovonics.com/product/four-zone-add-on-receiver-with-relay-outputs/
Solid equipment, and multiple motion options for you.
DC
Derek Caudill
Jun 04, 2018Is this for outdoors? If so, I've used these in the past with good results.
U
Undisclosed #2
Jun 04, 2018Optex 2000
GG
Gary Girton
Jun 04, 2018Solved. Wow, they all fit the bill. Thanks for your help!
Scott Bradford
Jun 05, 2018Dakota Alert DCMA-2500 Driveway Motion. Transmitter runs on a 9V battery, receiver runs on 12v. Relay outputs, including time delay relays. They work pretty well and are very cheap. (under $150 on amazon)
I'm deploying one right now to monitor the area on the back side of my parking garage where homeless like to hang out. It's all concrete so I can't get a hard line wire out there, but I have an S2 node inside the building. I"m going to tie the relay out of the receiver into one of the inputs on the node, on a time schedule so I'll get an alert if it goes off after hours.
New discussion
Ask questions and get answers to your physical security questions from IPVM team members and fellow subscribers.
Newest discussions