Oh wow! Thats pretty cool! I'm going to check that out. Thanks!
If you have 2 conductors at the door to the phone line, you can add a Channel Vision telephone entry product that works over the existing phone lines. Using the existing phones, you can answer the intercom and communicate, power to a strike and their relay will allow you to open the door from the phone too. model TE-110 kit.
Yeah I can get the wire to it... but it will be time consuming because of how the building is built. We also don't want exposed wire which is distracting so we provided the quote based on fishing the wire thru a series of nooks and cranny's. I think they want to "save money" on the labor part and are not understanding what is involved with fishing the wire through.
Thanks all to responding... I've already provided the quote for the parts at my costs, so I kind of feel like it's taking up too much of my time to worry about. Thanks again!
If you can get hardwired power to the thing, that means you can get two wires to it (18/2, even 20/2), which means any sort of two-wire system like Aiphone, EntryVue, etc. should be workable. For that matter, if you can get station or bell wire to it, you should be able to get UTP to it; it's not THAT much bigger.
I would tend to suspect it's not that "running a wire is not practical", so much as it's, "the previous installer couldn't figure out how to get a wire there", or even just "the previous installer couldn't be bothered to get a wire to it".
Glancing at the photo, it looks like any number of door mullions that I've run maglock, electric strike, and alarm contact wiring through before. It's not generally difficult, it just requires a little extra care to keep everything looking nice.
IPVMU Certified | 03/21/13 08:50pm
From what I understand, the door intercom is wireless because running a wire is not practical. And it's battery powered, but doesn't really need to be because there's a power source nearby. And because it's "legacy" wire, a straightforward Ethernet solution is not viable.
We've never used them, but did test inhouse an audio to Ethernet encoder from Barix.com and it seemed to work as advertised. So maybe have the door intercom connected to an audio to Ethernet encoder that goes over an Ethernet transport to an Ethernet to audio decoder at the other end. The Ethernet transport could be maybe an 802.11 wireless bridge, or maybe an Ethernet over powerline adapter if the power lines are not disjoined.
IPVMU Certified | 03/21/13 07:17pm
Their best solution may very well be to hardwire existing components in lieu of battery power. The difficulty and additional components required depend on the details of what is currently hanging. If you can find out, that will help.
IPVMU Certified | 03/21/13 07:11pm
Do you know the current make/model of the existing intercom system?
Only one main and one remote. The remote will be in an office about 50 ft. away.
IPVMU Certified | 03/21/13 07:02pm
If I understand the problem correctly, you're looking for a hardwired powered, but wireless communication intercom system?
How many remote call stations do you need? Is there only one 'main' answer station?