Member Discussion
Question About Point To Point Equipment.
I am working on a design for an area that is 1/2 mile long by about 1/10 mile wide. It has two structures on it. The first structure will be where the Internet is provided. The second structure is about 900 ft from the main structure. Both structures have power. I plan to place a 16 port NVR in each location and link the two locations together with a bridge. Each location will have point to point bridges to poles that I would like to mount 2 to 3 cameras. What would you suggest for the point to point bridges? I have used some Ubiquiti equipment, but I am considering Trendnet point to point bridges. I really like the Ubiquiti equipment once you get it working, but the company has virtually zero support.
Login to read this IPVM discussion.
***** *** *** **** suggestion. ***** *** ***** buildings ** *** **** all ** * ****** line ** **** *****. The ****** ******** ** where *** ******** ********** is *******, ** * will ** ***** *** P2P ******** ** **** side ** *** ****** building. * **** **** approximately ** *** ******* located ** **** ** the ********* ***** * plan ** *** *** wireless **********. *** ** the ********* **** **** its *** ***, ** I ***'* ***** *** bandwidth ************ **** ** as ***** ******* *** NVR **** ** ******** all *** ******* **** the ******* ** **** side ** *** ****. The ********* **** **** be **** ** **** location ** ** ******* wants ** **** ** remotely. *** ***** **** is *** * ********, but ** **** ******** where * **** ** place * ******** ******* switch *** * *** wireless ***** ** **** all ** *** *** 8 ********* ******* ********* back ** *** ****** in *** **** ********. I ** ******** ** 10 ****** *** ****** and *** ******* ********** I *** *** *** of *** * ********* cameras.
******* ***** **** ********'* support ** ********, *** still *** ** *** the ****. ** **** had ****** **** ******* with ***** ********* ** most ********. ** **** the $** ** ******** PtP ***** ****** * mile ****** * *** in * ** *** it *** **** ** for ~* ***** **** only *** ***** **** a ***** **** ******* the *** ** *** Tx ***** ** *******.
** **** **** ***** in * *** ** locations **** * - 4 ******* ***** **** Ubiquiti ** *** ***** network *** **** ****** only **** *** * problem ** *** *******. That *** *** **** an ******* **** * bunch ** ************ *** it **** **** * bunch ** ***** *** error ** **** * frequency **** *** ************ free ** ***** ******* nearby.
***** *** *** **** reply *****!
** ********* ** ** previous *****, * **** the ******** **** ************* 8 ******* ** **. I **** ** ****** all ** ***** ******* back ******* *** ******** wireless ****. *** ******** in *** ****** **** have *** ***** ******** radio. * **** **** set ***** ** **** a ***** ** ***** solution, *** * ** aware **** *** *** use ***** ****** *** point ** **********. ***** both *** ******** *** the ******* **** *** in * ******** **** with *** **** ******** supplying *** ******** ** in *** ******, ****** I *** *** ****** radio ** *** **********. I ***'* ***** ** will **** ***** *** dish ** ******** ***********. Not ***** **** *** many ******* (*** *****) the ****** ** * multipoint ****** *** ** from **** *****. * am ****** **** **** I **** **** ** have *** ******** ***** to ***** *******.
** ** ********* ***:
*** *** ******** ***** to ***** ************* ****** the ********* ** * to ** *******?
*** * ***** ** multipoint ************* **** **** a ***-****** ********** ******* remote ******?
**** ****** * ********** configuration ****** *** ****** of ********* **** **** point *** ******?
***** *** ***** *** your ****!
* **** ***** * - ** ******* ****** be ** *****. * only **** *** ******** where ** **** **** many, *** ** **** not *** *** ****** with **. ** ** also * ***** ** multipoint, ***** **** ******** to * ***** ** point ******** ** *** wired *******.
*** *** ******* ******** won't **** **** *** antenna. ********** ******** ****** supports *** ***, * did *** **** *** 150-160ish *******, *** ** was **** ** * pain ** *** *** up. ** * *** it ** ** **** again * ***** **** used * ****** ** antennas ** *** ********** side ** *** ****. My ***** ** **** 180 ******* ** ****** not ***** ** ****, or ** ***** ** give *** ****** ***** time *** **** ***** and *** ******* ****** 1 ****** ****** *********. I ***** *** ******** antennas ********* ** ** outdoor ******.
*** **** ** ******* by *** ********** ********* at *** **********. ** if *** *** * LiteAP **** * ******* throughput ** ************* ** that **** ******* **** be ******* ***** *** links, *** ********* ** each ****. **** ****** still ** **** **** enough *** * - 10 *******.
****** *****!!!
*** ***** ** **** with **** *********** ** that **** ****** *** have *** **** ** bandwidth, *** *** ******* that ** *** *** factor. * ******* **** is ** **** *** CCTV ** ** ***** 2 ******* ** **** the ****...
**** ******* *** ***** of **** *******, *'** seen * *** **** link *** ******* * 450 **** **** ******* of *** ***** *******.
** ***** ***, *** will *** ******* **** the ******* ***'* ****** in ****. ** ***** TCP, **** *** *** just *** *** ****** stop *** ******* ***** the ******* *******.
*** ** *** **** sure **** ******* ** adequate?
******** *** **** ******** and **** **** **** especially ** *** ***** point. **'* ****** ** setup. ** **** ******** many ************ *** ****** projects.
** **** ******* *** budget ****** ***** *** rock ***** **** ** Bridgewave **************, *** **'* way **** *********.
Newest Discussions
| Discussion | Posts | Latest |
|---|---|---|
|
Started by
Undisclosed Manufacturer #1
|
5
|
about 2 hours by Jerome Miller |
|
Started by
John Honovich
|
2
|
less than a minute by Scott Whittle |
|
Started by
Undisclosed #1
|
5
|
4 minutes by Undisclosed #1 |
|
Started by
Joseph Parker
|
4
|
less than a minute by Undisclosed #2 |
|
Started by
John Honovich
|
27
|
about 18 hours by Undisclosed Manufacturer #4 |
*** ****'* ******* *** information ***** **** ********* you'll ** ****** ******* the *** ******, *** I *** *** **** my **-** *** ******** point-to-point ** ******'* ******* products. **** **** **** multiple ***** **** ***** results.