I am trying to takeover a large Lorex system in several locations. 1 camera was a Hikvsion and I found it's IP address using the Hikvision SADP and added it to Exacq no problem. The next camera was a bullet style and I can't find its' IP address or find any tool that will help me find it. Any idea if this is possible?
Thanks
Did you try the Dahua Config tool?
Bingo! The Dahua tool found it. Exacq picked it right up. Thank you both.
Do a network scan using an IP scanner in your sub domain / LAN
Use a tool like ipscanner pro in the same ip range as the Hikvision you found
In the future, you could use Fing to find the camera IP, and if needed, to find which ports are open and responding with services. Usually, knowing which ports are in use will give you a leg up on finding the manufacturer. Also, you can check and see if the MAC address is associated with a camera manufacturer. Sometimes it is only registered to the NIC manufacturer.
Ask questions and get answers to your physical security questions from IPVM team members and fellow subscribers.
