Latest Version Of Genetec Omnicast?
Could someone tell me what the latest version of Genetec Omnicast is? Someone told me they were up to version 5.2 but I can not find any information on this version. I have a feeling they might have gotten Omnicast and security centre mix up.
4.8 service release 4 is the latest version of Omnicast.
5.2 SR 3 is the latest version of Security Center.
Since this topic has been brought up - what is the future plan for Omnicast vs Security Center? Both are being maintained? Can new users still buy Omnicast?
Hi Duncan,
The latest version of Genetec Omnicast is 4.8 (SR4). You can see the release versions in the table below:
| 4.8 (SR4) | 4.8.2609.3 |
| 4.8 (SR3) | 4.8.2520.6 |
| 4.8 (SR2) (HIP1) | 4.8.3.0 |
| 4.8 (SR2) | 4.8.2399.15 |
| 4.8 (SR1) (HIP2) | 4.8.2283.53 |
The latest version of Genetec Security Center is 5.2 (SR3). You can see the release versions in the table below:
| 5.2 (SR3) | 5.2.1045.11 |
| 5.2 (SR2) | 5.2.926.17 |
| 5.2 (SR1) | |
| 5.2 (GA) | 5.2.806.79 |
| 5.1 (SR3) (SP4) | 5.1.5454.249 |
John - to answer your question - yes, you can still buy Omnicast independently if you wish.
John,
Omnicast is still supported and sold. This is still a flagship enterprise offering, video only with federation capabilites into other Ommnicast sytems or to a Security Center system.
If any readers have specific availability questions, please don't hesitate to post or email John or one of his team members and we can relay as much information as necessary.
Thanks!
Jason Glover
Director of Sales Genetec
Newest Discussions
| Discussion | Posts | Latest |
|---|---|---|
|
Started by
Shaun Bannon
|
1
|
less than a minute by Shaun Bannon |
|
Started by
Ethan Ace
|
12
|
about 2 hours by Undisclosed #3 |
|
Started by
Bede Cammock-Elliott
|
28
|
1 minute by Christopher Freeman |
|
Started by
Undisclosed #1
|
8
|
about 2 hours by Undisclosed #1 |
|
Started by
John Honovich
|
1
|
about 14 hours by John Honovich |