[IPVM Note: Poster is from Network Optix]
Jon
I'm involved in this software developement, so you can trust me:-)
The software natively do not support Axis cameras with old 4.x firmware.
However there are a couple of ways to work around.
Simple one: use generic RTSP/HTTP link
1)You can right click on the server in the tree->Add Cameras ..
2) in the camera address put something like http://<IP address>/axis-cgi/jpg/image.cgi?resolution=320x240 Do not forget to provide proper credentials.
This way server will take MJPEG stream from the camera. The good news is that if resolution is less than 720xsomething motion detection is supported anyway( server does software MD). Max resolution of this camera is 640x480, so MD will work.
Downside is that if you will have 30 fps, it will be a bit CPU consuming( but likely not much ).
Another downside - it's MJPEG( storage consumption).
Other way:
Use our simple SDK to integrate this model. I not sure if this is good option unless you have a huge amount of this cameras.
Let me know if it was helpful. And let me know id you have more questions.
If you want to talk privately and have other questions/feedbacks about the software - more than welcome as well.