Subscriber Discussion

How Can I Check Upstream Bandwidth On Dahua DVR?

U
Undisclosed #1
May 31, 2016

I have Dahua DVRs and want to know how much bandwidth they use for remote viewing. Does Dahua show that? how? help.

U
Undisclosed #2
Jun 01, 2016
IPVMU Certified

I have an NVR, but you may have a similar screen for your DVR. My LAN1 is the outgoing bandwidth.

UI
Undisclosed Integrator #3
Jun 01, 2016

You have in the DVR the ability to set bitrate for each camera in both MAIN and SUB. This is important as the upstream bandwidth will change based on the stream(s) selected.

Avatar
Marc Pichaud
Jun 01, 2016

If you switch can be managed, you can enable the port miroring function .

Eg, Your DVR is on port 12, you put your PC on port 2, then setup that you want to miror 12 on port 2. Then on your PC you can use Windows bandwidth console or launch a graphical bandwidth utility to see Uploads and Dowload from the servers (here mostly video uploads to remote client, as incoming are mostly TCP Ack so very low)

in Some DVRs (and NVRs) you can customize precisely the outcoming streams to adapt to your xdsl or 3G/4G local reality (small res, low fps, strong compression..)

New discussion

Ask questions and get answers to your physical security questions from IPVM team members and fellow subscribers.

Newest discussions