Hikvision Network Configuration Help

Undisclosed #1

02/03/14 05:30pm

I have a question. I'm running a Hikvision 16 channel NVR with 14 cameras. All IP cams have been trimmed down to low video quality @15 FPS.

Because of all the network traffic, I had to put the NVR and cameras on the same segment, using another router 192.168.10.X strictly for the cams and NVR, then running that router into the router that connects to the internet at 192.168.1.X.

I need to figure out how to get the NVR through both routers so remote access can be used again. Any ideas?

Avatar

Jeffrey Hinckley

Norris, Inc., S. Portland, ME | 02/03/14 06:19pm

You will need a port forwarding rule on each router for the nvr port (usually 8000 on hikvision). Port forward the nvr port from the Internet wan to the inner router wan address (use static ip) the port forward from wan to the nvr on the camera network router.

Top Comment Votes - Past 3 Months
  • 1. John Honovich - 1881
  • 2. Brian Karas - 691
  • 3. Chris Dearing - 546
  • 4. Michael Miller - 374
  • 5. Brian Rhodes - 354
  • 6. Austin Rich - 328
  • 7. Sean Patton - 314
  • 8. Andrew Myers - 263
  • 9. Greg Cortina - 200
  • 10. Marty Major - 177
  • 11. Shannon Davis - 171
  • 12. Frank Lucero - 165
  • 13. Lynn Harold - 156
  • 14. Anthony Jones - 136
  • 15. Dwayne Cooney - 135
  • 16. Daniel Tyrrell - 133
  • 17. Ethan Ace - 128
  • 18. Eddie Perry - 126
  • 19. Sean Nelson - 114
  • 20. John Bazyk - 107
Manufacturers
Tools

AI Tester

BestMatch

Camera Calculator

Camera Finder

F-Stop Calculator

Chat

Integrator Finder

News Spider

Camera Comparison

Quizzes

Pages

About

Contact