Subscriber Discussion
Exacq, Axis PTZ (One Wired One Wireless), Connected And No Video Recorded (On Wireless Feed)
Strange issue, I've never encountered this one, before.
I have a site with two Axis PTZs (q6155-e). One is hard wired to the same network switch that exacq is plugged into and the other is connected wirelessly via ubiquiti pt to multi-pt wireless bridge. The computer rebooted (graceful reboot) and upon reboot all cameras appear as connected in Exacq but the main stream for the wireless Axis PTZ does not display. However, the secondary (lower res stream) does connect, display and I am now recording the sub-stream. I don't normally record the sub-stream, it is enabled simply for remote viewing, but I enabled recording, for now, in order to capture something until this is resolved.
**** *** ******** *** **** ** the **** *** ******* * ****** reboot ****** *** ******* *** **** time ** ***'* ******* (** ****'* worked ***).
* ***'* **** *** *******, ** I'm *** **** ** **** ** this ** * ******** ******* ** a ***** *******, * ***'* ***** it ** ****** ******* ***** ** another ******** ******** **** **** *** an **** ****** (*** ***) *** that *** ***** **** **** *** wireless ****.
* ** ******* ******** ******* *.**.*.* on **** *********** ******, ****** **** I *** ******* ******* *.**.*. ***** is ******* ******* **.**.*.*. * *** have ** **** ***** * ****, but * ******* * ***** *** here, *****, ** *** ** ****** has *** *****. ********* ** *** wired ****** ** ******* * ****** Exacq **** **** ** ** ***'* Exacq. * ***** ** ** *** that *** ********* **** ******* *** records *** *** ******* **** ** stuck ******* '***** ****'.
******.
****- ***** ********* ******> *** ** camera> ****** *********> ****** **** ** shows ********* *****... (*** **** ****, the ********* **** ** *********) **** a ********** ****** ** *******... (***) and ***** ********* ******> *** ** camera *** ****** ***** ** ********* (green). ****** ** ****.
Newest Discussions
| Discussion | Posts | Latest |
|---|---|---|
|
Started by
Undisclosed Integrator #1
|
24
|
1 minute by Undisclosed Integrator #4 |
|
Started by
Brian Rhodes
|
10
|
less than a minute by Ryan King |
|
Do Cloud Systems Increase Or Reduce The Need For Integrators To Be Proficient In IT And Networking?
(15)
Started by
Ryan King
|
15
|
less than a minute by Ryan King |
|
Does IBC/NFPA Require The 2nd Relay Of REX Motion Sensor To Result In Direct Interruption Of Power?
(4)
Started by
Undisclosed Integrator #1
|
4
|
less than a minute by Chris Johnson |
|
Started by
Undisclosed #1
|
9
|
less than a minute by Undisclosed Integrator #5 |
* ******* *** ****** **** *****, factory ***** *** ****** ******* *** IP ********, **** * **** ** a *** ** ******* *** ***** it **** ** *****. **** **** connected *** ********* ***-****** *** ****** and **** **** ********* (**** *** always *********).
***** ** ** *******, * ***'* want ** ****** *** ****** ** the ******, *** ** **** ****** at **** ***** (******** ***/** ******), I'll **** ** **** ** *** on ** *** *** **** *******.
****- ***, ******** *** ** ******* does ****** *** ******** ***** ********** with *** ******.