Member Discussion
Dahua I-Frame Interval Question
What does Dahua mean in their camera encode settings when they say I-Frame Interval 10~150?
Does a value of 10 mean that you will get a new iframe every 10 seconds?
Running Dahua rtsp through a program to create HLS stream.
It has a lot... a lot of artifacts behind moving items.
The FPS is set to 20 by default and the IFrame Interval is set to 40.Does that mean a new IFrame every 40 seconds?
I lowered the IFrame Interval to 10 and it is better but I still get artifacts on moving items.
Some of our other Dahua cameras have IFRame Interval set to 1 second.
Any direction?
Thanks
Login to read this IPVM discussion.
***** *** ** ****!
* **** **** ** adjust *** ******* ***** I *** *** *** of *** *********...
** **** **** ** other ***** **** *** Dahua ******* ** **** same *** ******** **** no *****... **** ******** this *** ** ********* "tough ***" *** **** should *** ******.
* ******* **** ** our ***** ***** ******* and **** *** *** with ** ****** ******** of *. ******** ** says * ***. *** FPS ** **** *. So **** * *** that * ******* *** IFrame ******** ** ** must ** ***** ** high.
****** *****!
Newest Discussions
Discussion | Posts | Latest |
---|---|---|
Started by
Undisclosed Integrator #1
|
14
|
1 minute by Morten Tor Nielsen |
Started by
John Honovich
|
23
|
less than a minute by Undisclosed #7 |
Started by
John Honovich
|
1
|
about 5 hours by John Honovich |
Started by
Scott Napier
|
3
|
less than a minute by Brian Rhodes |
Started by
Undisclosed Integrator #1
|
9
|
less than a minute by Undisclosed Integrator #1 |
*** ****** **** ******, **** **:
** **** ********:
** ***** ** * frame ***** ** ******, so ** *** *** streaming ** ** ****** per ******, **** ** 2 *-***** *** ******.
** *****, ***** ********** an * ***** **** every * ******* (*.*., frame **** * *).
***** *** * ***** codec **** ***** **** impact ***** ******* / I ***** ********, **** I ** *** ****.