Connecting Main Stream From Dahua XVR To TWO Devices Simultaneously

Connecting main stream from Dahua XVR to TWO devices simultaneously.

Scenario is:

Analogue cameras connected to Dahua XVR which is used only as an encoder (disk-less) to a Milestone NVR where all 16 channels are recorded via the main stream and the XVR also connected to a Dahua M30 Video Wall Controller.

Can i use the channel main stream on the Milestone NVR & Dahua Video Wall Controller M30 from the XVR simultaneously? or must i use the sub-stream to the Video Wall Controller which would be of a lower resolution.

Login to read this IPVM discussion.
Why do I need to log in?
IPVM conducts unique testing and research funded by member's payments enabling us to offer the most independent, accurate and in-depth information.

******* ** ****** ** ******* ** **** ***'* ******* ****** upload *******(*****,******* ** *** ** ****** ********,** ***** ***** ** more ************ ***** ** **** *****).

***** ***** ***'* ****** ****** ******* ***** ** ****** ******~******,** if **** *******'* ********** *** ***** **** *****,**** ***** *** can ***** *** **~**********.

********* ****** ** *** ****** **** *** ********* *******.** **** sure ** ******* *** *** **** **** ** *** ********* way:

*.******* * *** ***,**** **** *** ******* *** *** ********** with *******.

*.******* *** ** ** *** **** *** ******* ** ***.

*.***** *** ***'* ******* ***** *** ** ** *** **** time,both **** *** ********** ** *** **** ****.*** ** **** PC *** ** ** ***** *** *** ** *** **** time *** **** ****.