I'm using a couple Axis A1001 devices on a new buildout. Deviation from my norm, but it actually saved me on cost. Now, knowing that the power output for the locking hardware pin set has a max of 500mA for both doors, I bid an external supply for the second door.
While trying to rethink and further cut cost on material and labor, I started researching strikes with a current draw of 250mA or less so I could power both strikes from the A1001 without the external power supply requirement. I'm a HES fan and usually purchase their product, but they have no product that fits this need (to my knowledge anyways).
I've found a few, some of which were discussed here back in 2012 so I'm wondering if anyone has experience with any of the following devices:
* SDC's Low Amp Devices (These don't fit the requirement, but I'm still interested)
If anyone has used these products or any I haven't found, I'd like to hear your thoughts and/or suggestions. Thank you