Member Discussion
Anyone Familiar With Mobile Electronics Installation?
Adding a 12VDC NVR and some other stuff to our demo van. I told my tech this ziptie should be trimmed flush, he says no because leaving the tail on makes it less likely to cut someone working near the battery since there is no chance of a sharp edge.
Anyone here agree with me, or should I let him leave it as is?
Login to read this IPVM discussion.


(**** *** ***** ********** with ****, *** **** joke ** *** ******** to ***** ****.)
** **'* ****** *** it *****, **'* *** stupid.....??
**** *** ****** **** to ** ** *** the **** **** ** just * *** *******, to **** ** * fuse ** **** ** a *****. ****** *****!
****, *** *** *** UV ***** ***** ***** zip ****, **** **** melt ** * ***** temperature *** **** *** wire ********** **** ** heats **, ******* **** wire ** ******** ******* through ** ******* **** no ******* *** **** short ****.
**** ***** **** ***** store ***** ******* ********* designed ** ****** ******* wires ** *** ******* post. *** ****** **** an ****** ****. ** a **** *********** ********** by *** ***** *** zip *** **?
*** **** **** ** my ********* ***, **** way *** **** *** a **** ***, *** then **** ******** *** booster ***** ******* **** if *** *** *** bumps ***** ** **** flex ** ****** * solid **********.
Newest Discussions
Discussion | Posts | Latest |
---|---|---|
Started by
Lee Jones
|
6
|
less than a minute by Tomi Eriksson |
Started by
Matt Brodine
|
4
|
12 minutes by Undisclosed Integrator #1 |
Started by
Ethan Ace
|
5
|
21 minutes by Michael Miller |
Started by
John Scanlan
|
21
|
about 5 hours by Jon Dillabaugh |
Started by
Virgil Reed
|
7
|
less than a minute by Undisclosed Integrator #4 |
***, ** *** * better ****** ** ******* his ******* ** *** bone ***** ******* * dead *** **** ** does ******* *** ****** else ****** ****** ***** the ****.