Does any on know what voltage is used for Weigand reader port. i thought it was 5vdc but thats only when a RDR is connected.
we have a site that wants external LEDs based on admit ot reject. I cannot use Outputs because i have no spare ones in the panel and no room for an Output board.
currently only using 4 wires for Q-Scan Mini QR reader. LED control wires are free.
**** ****** **** *** *****?
*"* *** **** * ***% ****** what *** *** ******.
** *** **** ** **** **** voltage *** *** **** *** **** are ***** **** * ******, ** would ****** ** *** ****** **** you *** *****. *, **, *****. Just **** ** **** ** *** specs ** **** ******.
** *** *** ****** **** ******* the ***** ** ******* **** *** just **** ** **** ** ***** specs. **'* **** ** ** ******** dependent. ** **** *** ** ********* with **** ********* ** *** ********.
** ***** ****** **** * **** of *** *** ******* *** *** separately ** *** **** **. ** may *** * ****** ******** ** positive. *** **** ** **** ** test ***.
**,
* **** ***** *** ***** *********. for ******* * *** **** ** RP40 *** **** ** ** ** SWH,S2,Mercury ** ******** ** ***** ****** and ** ****** *** ****. **** means ***** ** * ****** ******* to ***** *** ***. ** ****** to **** *** **** ** ** does ** * *** **** ** some ******** ****.( ** ****** ** under *****) * **** ** ***** an *** **** *** *****.
******
* ********** **** *** *** ****** now.
*** ***** **** ** **** ** the ****** ************ *********** *** ** will **** *** **** ****(*) *** can *** ** ******* *** ****. It **** **** **** *** ***** wire ***** **** *****. ** *** as ******* ** **** ****** ** the ******. *** ******** *** **** has * ***** (** * ******** correctly) ** *-*****. * ********** ***** only ***** *** *** **** *** same ******* **** *'* ********* *** reader ****. ** ** *'* ******* 12vdc ** ***** *** ****** * would *** *** ** **** * to ******* *** ******.
** *** **** ** *** **** I ******* ** **** * ****** negative. ** *** *** ***** ** switching ***** ** *** ********. ****'* obviously **** ** **** ** ******* the ***** ******** ** ******** ** negative ** *** **** *** *** turns **.
* *** ** *********** **** ***** in ***** ** ******* **** ********. Depending ** *** **********, *** ******* we **** ** *** ***** *** only. **** **** **** *** ***** led ** **** * ***** **** is ******. **** *********** ***'* ** that ** ** **** ** **** up *** *** *** *** ** the ***** ***** *** ********* *****. To ******* *** **** ******.
****** **
*** ****** *** ******* ********* *** 12 ***** *** ****** **** **** (12 *****) ** *** (******) **** switching ******. *** * ********* ******* the *** ******* ******** *** ****** ground (*** ********) ** *** **** that ******** ** *****. ** ** change, ****** **** ********* ********* **** from ****** ****** ** *** ****** power ******** ** *** **** ** happening. ** *** ******* ** ********* from ** ***** *** *** **** to *** *** *** ***** ******* to ***** *** **** ** ** appropriate ***** (*** * * **** relay **** ** * *****- ** will ****, **** ** ** ****-*** or ******) *** **** ***** *** LED **** *** ***** ******** ********* an *********** ******* ******.
**** *** *** *’** **** * swing ** ****. ** * understand *********, *** **** **** *** code ******* ** *** ********* *** it’s ********* ***** * ***** **** the ****** ******* *****.
**** ************ ******* ****** * *** sometimes * ***** ** **** * wiegand **** *** ******* *** ***. This ** ******* ** *** **********. Usually ***** ** ** *** **** and ********* **’* * ****** **** / ****** ***** ** ****** **** bi-color.
*** ****** **** *** ******** *** LED ******* ** **** *********, *** controller ****. ***** * ***** ** discussed **** **** *** **’* ****** 5 ** ***.
* *** **** ******* ***** *** always ********* ******** *** *** ****** you ********* *** ********* ******* ***** in **** ******.
********* ** *** *** (*** *'* not ******** **** *** *-**** **** QR ****** *** ****** *******), *** can ** *** **/* ****** ***** to *** *** *** *** ** * bus **** *** ***** ** * reader ****** **** *** ****. **** ACS ***** ****** ******* *****/******* *** the ***, *** *** *********. **** ACS ******* ****** ******* **** ******* the ****** (********* **/***), ***, ***, 250mhps *** **** ** ********* *******. Some ********* **** **** **** *** and, ****** ******* ***** ***** ***.
*** ****** **** **** **** ******** with *** ***** ******* ** *****. That *****, **'* **** ******** ** run * ********* ****** **** ** lease: **/**, **/*, **/*, **/*, *** 22/2. **** ***** *** **** ******* at *** **** ******* ****** ** remote ****** ****** *******.
*****, *'* *** ******** **** *** Q-Scan **** ** ******. ** ******* at **** ****** ****, ** ***** about ** ****** ** *******. *'* interested ** **** ****** ***** ** this ********.
Ask questions and get answers to your physical security questions from IPVM team members and fellow subscribers.
* **** ***** ******** ****** ****, but * ***** *** ***** **** there ** ** ******* ******** *** it's ****** ********* ** *** ******. The **** ** * ******** *** reader *** ******* ******* *** *** wires *** ********* ** ***, ** it's ****** ******** ***** ***** ** any *******.
**** *****'* **** *** ******'* *********** still *** ** *** ** ** a **** ** ** ****** ** change *** ***** ** ** ******** LED, *** ****.