Lately I've ran across an odd problem with Exacqvision. This is occurring across multiple Exacq NVRs with different Hikvision camera models. Basically what is happening, as demonstrated in the picture below, is Exacqvision is inserting multiple lines of motion masking at random. The lines are only within Exacqvision and are not being sent to the masking of the camera itself. I would suspect that I'm not the only one having this problem as this is not a configuration field that would be checked often. I happened across it purely by luck after noticing that a particular camera was not detecting motion. I have cleared the lines several times but they keep coming back. Any ideas?